MRG REE - Fotinho REE Exploration Licence Granted
Released
Released
Announcement PDF
ASX ANNOUNCEMENT
22 October 2024
FOTINHO 11000 REE EXPLORATION LICENCE GRANTED,
ABUTTING ADRIANO REE + TH PROJECT, MOZAMBIQUE
Key Highlights
• Fotinho Exploration Licence 11000 (19,865.18 ha) has been granted over a newly identified,
high potential Thorium (Th) and Rare Earth Element (REE) district in Mozambique (refer
ASX Announcement 11 May 2022).
•
Historical work, leading to the application for Fotinho, showed the presence of monazite
and highly elevated Th and REE grades, with Th assays >1,000 ppm in soil and panned heavy
mineral concentrate and 559 ppm in rock (refer ASX Announcement 11 May 2022).
•
Granting of Fotinho follows on from recently announced very high rare earth oxide (REO),
magnet rare earth oxide (MREO) and Th assay results from stream sedimentary sampling
at MRG’s adjacent and abutting Adriano 11002 Th and REE exploration licence (refer ASX
Announcement 17 October 2024).
•
Re-imaging of regional aerial radiometric data clearly shows that Fotinho contains a
number of well defined, discrete Th anomalies (Figure 4). Assay results reported last week
for Adriano demonstrated the strong correlation between Th and REE, meaning that Th can
be used as a proxy for REE. The Th anomalies shown in Figure 4 will be an immediate focus
for soil sampling.
•
The combined area of Fotinho and Adriano projects represents an opportunity for MRG to
explore a newly identified, virtually unexplored mineral district of high potential for rare
earth deposits discovery, under 100% owned title.
•
A drainage pattern interpretation has been completed for Fotinho.
•
MRG’s exploration team will be on the ground to initiate exploration at Fotinho upon
completion of environmental licencing and easing of the upcoming wet season.
MRG Metals Limited ABN: 83 148 938 532 / ASX Code: MRQ
Phone: +61 3 5330 5800 / Fax: +61 3 5330 5890
12 Anderson Street West, Ballarat VIC 3350 / PO Box 237 Ballarat VIC 3353
www.mrgmetals.com.au / info@mrgmetals.com.au
MRG Metals Limited (“MRG” or “the Company”) (ASX Code: MRQ) is pleased to announce the grant
of a third new Rare Earth Elements (REEs) exploration licence (EL), Fotinho 11000.
Fotinho – Rare Earth Elements project:
The new REE project Fotinho (11000L; 19,865.18 ha) is situated 780 km North-East of the Company’s
Corridor Central (11142C) and Corridor South (11137C) Heavy Mineral Sands (HMS) Mining licence
applications (MLAs) and 230 km North-Northeast of the port city of Beira and 120km from the port
of Quelimane (refer Figure 1). Fotinho, in combination with MRGs adjacent Adriano 11002 REE EL
and the Olinga 11005 U and REE EL, were generated based on highly elevated Th (in the case of
Fotinho and Adriano) and U (in the case of Olinga) from regional aerial radiometric survey work. On
the ground historical exploration, with some limited sampling, happened within ELA Fotinho (refer
ASX Announcement 11 May 2022, Figure 4). The exploration and sampling clearly showed the
presence of Monazite in some of the sampled material, as well as highly elevated REE grades (refer
ASX Announcement 11 May 2022). Thorium (Th) grades as high as >1,000 ppm Th in a soil and HMC
sample and 559 ppm in a rock sample from within Fotinho were reported from X-ray fluorescence
(XRF) analysis, while X-ray diffraction (XRD) results showed the clear presence of Monazite in the
samples from the REE area (refer ASX Announcement 11 May 2022). Fotinho and Adriano EL’s
include both hard-rock and recent sediments, covering areas of high-grade metamorphic gneisses,
undifferentiated granites and granitoid rocks within the Mozambique Metamorphic Province and
sediments from the Mozambique Basin sediments (refer Figure 2).
Recently reported assays from a stream sedimentary sampling program the adjacent Adriano (refer
ASX Announcement 17 October 2024) returned very high REO, MREO and Th results:
• 3.24%, 3.12% and 2.70% TREO respectively;
• Nd+Pr oxides > 350ppm, 21 of the 42 samples exceeded the MREO target with 8 samples
>1000ppm; Highest Pr2O3 >1,170ppm (0.117%);
• Dy+Tb oxides >35ppm, 4 of the 42 samples exceed the MREO target and with 3 of these at
>100ppm; and
• ZrO2 >13,500ppm (>1.35%), which exceeded the maximum reading of the analytical
technique.
Re-interpretation and imaging of the regional aerial magnetic and radiometric survey data shows
continuation of Th anomalism westward from Adriano into the new Fotinho licence, with very
discrete, high intensity Th anomalies evident in Fotinho demonstrating high potential for discovery
(Figure 4).
The drainage pattern analyses conducted for Adriano has now been completed for Fotinho as well
(Figure 3). This will be used in the planning of a stream sedimentary sampling program at Fotinho.
MRG Metals Limited ABN: 83 148 938 532 / ASX Code: MRQ
Phone: +61 3 5330 5800 / Fax: +61 3 5330 5890
12 Anderson Street West, Ballarat VIC 3350 / PO Box 237 Ballarat VIC 3353
www.mrgmetals.com.au / info@mrgmetals.com.au
MRG will provide an update of proposed exploration in due course.
MRG Metals Chairman, Mr Andrew Van Der Zwan said: “The granting of Fotinho comes at the
perfect time on the back of our initial success and findings at the adjoining Adriano Licence. We are
searching for both primary and alluvial REE and Th deposits, leveraging off our knowledge from
Corridor HMS Project. While we don’t yet know the source of the REE + Th identified in stream
sediment samples at Adriano, the strong correlation demonstrated between Th and REE makes the
Th anomalies that show on the re-imaged airborne radiometric spectrometer data in our Fotinho
tenement are highly exciting as potential primary sources for REE.
A two-pronged exploration approach will see a repeat of the Adriano stream sediment technique
extended westward into Fotinho, combined with direct target testing of Th anomalies by soil
sampling.”
MRG Metals Limited ABN: 83 148 938 532 / ASX Code: MRQ
Phone: +61 3 5330 5800 / Fax: +61 3 5330 5890
12 Anderson Street West, Ballarat VIC 3350 / PO Box 237 Ballarat VIC 3353
www.mrgmetals.com.au / info@mrgmetals.com.au
Figure 1: Map of the location of MRG’s new granted Fotinho 11000 Rare Earth Exploration licence (EL), as well
as recently granted Adriano 11002L Rare Earth EL and Olinga 11005L REE and U EL in relation to MRGs exiting
Heavy Mineral Sands exploration licences and the port city of Beira.
MRG Metals Limited ABN: 83 148 938 532 / ASX Code: MRQ
Phone: +61 3 5330 5800 / Fax: +61 3 5330 5890
12 Anderson Street West, Ballarat VIC 3350 / PO Box 237 Ballarat VIC 3353
www.mrgmetals.com.au / info@mrgmetals.com.au
Figure 2: Geological map (1:1 000 000 geological map of Mozambique, dated 1987) showing the geology of
the adjacent Fotinho 11000 and Adriano 11002 licences. Image in Lat Long degree decimal degree.
MRG Metals Limited ABN: 83 148 938 532 / ASX Code: MRQ
Phone: +61 3 5330 5800 / Fax: +61 3 5330 5890
12 Anderson Street West, Ballarat VIC 3350 / PO Box 237 Ballarat VIC 3353
www.mrgmetals.com.au / info@mrgmetals.com.au
Figure 3: Map showing the adjacent Fotinho 11000 and Adriano 11002 licences, with the drainage pattern
analyses also now covering Fotinho 11000. Base image SRTM of the two licences, image in Lat Long degree
decimal degree.
MRG Metals Limited ABN: 83 148 938 532 / ASX Code: MRQ
Phone: +61 3 5330 5800 / Fax: +61 3 5330 5890
12 Anderson Street West, Ballarat VIC 3350 / PO Box 237 Ballarat VIC 3353
www.mrgmetals.com.au / info@mrgmetals.com.au
Figure 4: Map showing the granted adjacent Rare Earth Element exploration licences Fotinho 11000 and
Adriano 11002 plotted on re-imaged airborne radiometric spectrometer data of a regional national airborne
geophysical survey. Recent stream sedimentary total rare earth oxide (REO) grades from Adriano shown in
red (refer ASX Announcement 17 October 2024), with the historical sampling positions shown in yellow (refer
ASX Announcement 11 May 2022). Image in Lat Long degree decimal degree.
Competent Persons’ Statement
The information in this report, as it relates to Mozambique Exploration Results is based on information compiled
and/or reviewed by Mr JN Badenhorst, who is a member of the South African Council for Natural Scientific
Professions (SACNASP) and the Geological Society of South Africa (GSSA). Mr Badenhorst is a consultant of the
Company of the Company and has sufficient experience which is relevant to the style of mineralisation and type
of deposits under consideration and to the activity which has been undertaken to qualify as a Competent Person
as defined in the 2012 Edition of the “Australasian Code for Reporting of Exploration Results, Mineral Resources
and Ore Reserves”. Mr Badenhorst consents to the inclusion in this report of the matters based on the
information in the form and context in which they appear.
MRG Metals Limited ABN: 83 148 938 532 / ASX Code: MRQ
Phone: +61 3 5330 5800 / Fax: +61 3 5330 5890
12 Anderson Street West, Ballarat VIC 3350 / PO Box 237 Ballarat VIC 3353
www.mrgmetals.com.au / info@mrgmetals.com.au
Authorised by the Board of MRG Metals Ltd.
For more Information please contact:
MRG Metals
Andrew Van Der Zwan
Chairman
M: +61 (0) 400 982 987
E: andrew@mrgmetals.com.au
Investor Relations
Ben Creagh
NWR Communications
M: +61 (0) 417 464 233
E: benc@nwrcommunications.com.au
MRG Metals Limited ABN: 83 148 938 532 / ASX Code: MRQ
Phone: +61 3 5330 5800 / Fax: +61 3 5330 5890
12 Anderson Street West, Ballarat VIC 3350 / PO Box 237 Ballarat VIC 3353
www.mrgmetals.com.au / info@mrgmetals.com.au
Section 1 Sampling Techniques and Data
Criteria
Sampling techniques
Explanation
Nature and quality of
sampling (eg cut channels,
random chips, or specific
specialised industry
standard measurement
tools appropriate to the
minerals under
investigation, such as down
hole gamma sondes, or
handheld XRF instruments,
etc). These examples
should not be taken as
limiting the broad meaning
of sampling.
Comment
N/A, no sampling has taken place by MRG on
Fotinho 11000 yet
Include reference to
measures taken to ensure
sample representivity and
the appropriate calibration
of any measurement tools
or systems used.
Aspects of the
determination of
mineralisation that are
Material to the Public
Report. In cases where
‘industry standard’ work
has been done this would
be relatively simple (eg
‘reverse circulation drilling
was used to obtain 1 m
samples from which 3 kg
was pulverised to produce
a 30 g charge for fire
assay’). In other cases more
explanation may be
MRG Metals Limited ABN: 83 148 938 532 / ASX Code: MRQ
Phone: +61 3 5330 5800 / Fax: +61 3 53330 5890
12 Anderson Street West, Ballarat VIC 3350 / PO Box 237 Ballarat VIC 3353
www.mrgmetals.com.au / info@mrgmetals.com.au
Criteria
Explanation
required, such as where
there is coarse gold that
has inherent sampling
problems. Unusual
commodities or
mineralisation types (eg
submarine nodules) may
warrant disclosure of
detailed information.
Comment
Drilling techniques
Drill type (eg core, reverse
circulation, open-hole
hammer, rotary air blast,
auger, Bangka, sonic, etc)
and details (eg core
diameter, triple or standard
tube, depth of diamond
tails, face-sampling bit or
other type, whether core is
oriented and if so, by what
method, etc).
N/A
Drill sample recovery
Method of recording and
assessing core and chip
sample recoveries and
results assessed.
N/A
Measures taken to
maximise sample recovery
and ensure representative
nature of the samples.
Whether a relationship
exists between sample
recovery and grade and
whether sample bias may
have occurred due to
preferential loss/gain of
fine/coarse material.
MRG Metals Limited ABN: 83 148 938 532 / ASX Code: MRQ
Phone: +61 3 5330 5800 / Fax: +61 3 53330 5890
12 Anderson Street West, Ballarat VIC 3350 / PO Box 237 Ballarat VIC 3353
www.mrgmetals.com.au / info@mrgmetals.com.au
Criteria
Logging
Explanation
Whether core and chip
samples have been
geologically and
geotechnically logged to a
level of detail to support
appropriate Mineral
Resource estimation,
mining studies and
metallurgical studies.
Comment
N/A
Whether logging is
qualitative or quantitative
in nature. Core (or costean,
channel, etc) photography.
The total length and
percentage of the relevant
intersections logged.
Sub-sampling
techniques and
sample preparation
If core, whether cut or
sawn and whether quarter,
half or all core taken.
N/A
If non-core, whether riffled,
tube sampled, rotary split,
etc and whether sampled
wet or dry.
For all sample types, the
nature, quality and
appropriateness of the
sample preparation
technique.
Quality control procedures
adopted for all subsampling stages to
maximise representivity of
samples.
Measures taken to ensure
that the sampling is
representative of the in situ
material collected,
MRG Metals Limited ABN: 83 148 938 532 / ASX Code: MRQ
Phone: +61 3 5330 5800 / Fax: +61 3 53330 5890
12 Anderson Street West, Ballarat VIC 3350 / PO Box 237 Ballarat VIC 3353
www.mrgmetals.com.au / info@mrgmetals.com.au
Criteria
Explanation
including for instance
results for field
duplicate/second-half
sampling.
Comment
Whether sample sizes are
appropriate to the grain
size of the material being
sampled.
Quality of assay
data and laboratory
tests
The nature, quality and
appropriateness of the
assaying and laboratory
procedures used and
whether the technique is
considered partial or total.
N/A
For geophysical tools,
spectrometers, handheld
XRF instruments, etc, the
parameters used in
determining the analysis
including instrument make
and model, reading times,
calibrations factors applied
and their derivation, etc.
Nature of quality control
procedures adopted (eg
standards, blanks,
duplicates, external
laboratory checks) and
whether acceptable levels
of accuracy (ie lack of bias)
and precision have been
established.
MRG Metals Limited ABN: 83 148 938 532 / ASX Code: MRQ
Phone: +61 3 5330 5800 / Fax: +61 3 53330 5890
12 Anderson Street West, Ballarat VIC 3350 / PO Box 237 Ballarat VIC 3353
www.mrgmetals.com.au / info@mrgmetals.com.au
Criteria
Verification of
sampling and
assaying
Explanation
The verification of
significant intersections by
either independent or
alternative company
personnel.
Comment
N/A
The use of twinned holes.
Documentation of primary
data, data entry
procedures, data
verification, data storage
(physical and electronic)
protocols.
Discuss any adjustment to
assay data.
Location of data
points
Accuracy and quality of
surveys used to locate drill
holes (collar and down-hole
surveys), trenches, mine
workings and other
locations used in Mineral
Resource estimation.
N/A, no on-the-ground exploration has taken place
yet
Specification of the grid
system used.
Quality and adequacy of
topographic control.
Data spacing and
distribution
Data spacing for reporting
of Exploration Results.
N/A
Whether the data spacing
and distribution is sufficient
to establish the degree of
geological and grade
MRG Metals Limited ABN: 83 148 938 532 / ASX Code: MRQ
Phone: +61 3 5330 5800 / Fax: +61 3 53330 5890
12 Anderson Street West, Ballarat VIC 3350 / PO Box 237 Ballarat VIC 3353
www.mrgmetals.com.au / info@mrgmetals.com.au
Criteria
Explanation
continuity appropriate for
the Mineral Resource and
Ore Reserve estimation
procedure(s) and
classifications applied.
Comment
Whether sample
compositing has been
applied.
Orientation of data
in relation to
geological structure
Whether the orientation of
sampling achieves
unbiased sampling of
possible structures and the
extent to which this is
known, considering the
deposit type.
N/A
If the relationship between
the drilling orientation and
the orientation of key
mineralised structures is
considered to have
introduced a sampling bias,
this should be assessed and
reported if material.
Sample security
The measures taken to
ensure sample security.
Audits or reviews
The results of any audits or
reviews of sampling
techniques and data.
N/A
N/A
MRG Metals Limited ABN: 83 148 938 532 / ASX Code: MRQ
Phone: +61 3 5330 5800 / Fax: +61 3 53330 5890
12 Anderson Street West, Ballarat VIC 3350 / PO Box 237 Ballarat VIC 3353
www.mrgmetals.com.au / info@mrgmetals.com.au
Section 2 Reporting of Exploration Results
Criteria
Mineral tenement
and land tenure
status
Explanation
Type, reference
name/number, location
and ownership including
agreements or material
issues with third parties
such as joint ventures,
partnerships, overriding
royalties, native title
interests, historical sites,
wilderness or national park
and environmental
settings.
Comment
• Exploration licence Fotinho 11000 (Rare earth
Elements) was issued on 08/10/2024 and this
first period is valid till 08/10/2029.
The security of the tenure
held at the time of
reporting along with any
known impediments to
obtaining a licence to
operate in the area.
Exploration done by
other parties
Acknowledgment and
appraisal of exploration by
other parties.
•
•
•
•
•
Geology
Deposit type, geological
setting and style of
mineralisation.
A report and data were supplied to MRG by Dr
Luc Antoine of historic work that took place in
2014, report used in target generation work of
the Fotinho 11000 licence.
The report and data refers to field
reconnaissance work, data only used for target
generation.
Some rock and heavy mineral concentrate
samples were collected within the now Fotinho
11000 licence area.
Analysis (XRF and XRD) of these samples were
done by SGS South Africa (Pty) Ltd, analytical
technique
seen
as
appropriate
for
reconnaissance work with results used for target
generation.
No information is available on quality control
procedures.
• REE and U licences have a number of hard-rock
U and REE targets associated with Namarrói
Group primary granitic sources and the contact
between different age granites in high-grade
MRG Metals Limited ABN: 83 148 938 532 / ASX Code: MRQ
Phone: +61 3 5330 5800 / Fax: +61 3 53330 5890
12 Anderson Street West, Ballarat VIC 3350 / PO Box 237 Ballarat VIC 3353
www.mrgmetals.com.au / info@mrgmetals.com.au
Criteria
Explanation
Comment
metamorphic gneiss within the Mozambique
Metamorphic Province, as well as Quaternary
alluvial and fluvial deposits.
Drill hole
Information
A summary of all
information material to the
understanding of the
exploration results
including a tabulation of
the following information
for all Material drill holes:
N/A
- easting and northing of
the drill hole collar
- elevation or RL
(Reduced Level –
elevation above sea
level in metres) of the
drill hole collar
- dip and azimuth of the
hole
- down hole length and
interception depth
- hole length.
If the exclusion of this
information is justified on
the basis that the
information is not Material
and this exclusion does not
detract from the
understanding of the
report, the Competent
Person should clearly
explain why this is the case.
MRG Metals Limited ABN: 83 148 938 532 / ASX Code: MRQ
Phone: +61 3 5330 5800 / Fax: +61 3 53330 5890
12 Anderson Street West, Ballarat VIC 3350 / PO Box 237 Ballarat VIC 3353
www.mrgmetals.com.au / info@mrgmetals.com.au
Criteria
Data aggregation
methods
Explanation
In reporting Exploration
Results, weighting
averaging techniques,
maximum and/or minimum
grade truncations (eg
cutting of high grades) and
cut-off grades are usually
Material and should be
stated.
Comment
N/A
Where aggregate
intercepts incorporate
short lengths of high grade
results and longer lengths
of low grade results, the
procedure used for such
aggregation should be
stated and some typical
examples of such
aggregations should be
shown in detail.
The assumptions used for
any reporting of metal
equivalent values should be
clearly stated.
Relationship
between
mineralisation
widths and intercept
lengths
These relationships are
particularly important in
the reporting of Exploration
Results.
N/A as no drilling / trenching has taken place
If the geometry of the
mineralisation with respect
to the drill hole angle is
known, its nature should be
reported.
If it is not known and only
the down hole lengths are
reported, there should be a
clear statement to this
MRG Metals Limited ABN: 83 148 938 532 / ASX Code: MRQ
Phone: +61 3 5330 5800 / Fax: +61 3 53330 5890
12 Anderson Street West, Ballarat VIC 3350 / PO Box 237 Ballarat VIC 3353
www.mrgmetals.com.au / info@mrgmetals.com.au
Criteria
Explanation
effect (eg ‘down hole
length, true width not
known’).
Comment
Diagrams
Appropriate maps and
sections (with scales) and
tabulations of intercepts
should be included for any
significant discovery being
reported These should
include, but not be limited
to a plan view of drill hole
collar locations and
appropriate sectional
views.
All figures (Figures 1 to 4) are in the main body, Refer
to the main body of the report (no Tables in the
report).
Balanced reporting
Where comprehensive
reporting of all Exploration
Results is not practicable,
representative reporting of
both low and high grades
and/or widths should be
practiced to avoid
misleading reporting of
Exploration Results.
All exploration results and information linked to all
the MRG projects / licences have been reported.
Other substantive
exploration data
Other exploration data, if
•
meaningful and material,
should be reported
including (but not limited
to): geological
observations; geophysical
survey results; geochemical
survey results; bulk samples
– size and method of
treatment; metallurgical
test results; bulk density,
groundwater, geotechnical
and rock characteristics;
potential deleterious or
contaminating substances.
The airborne magnetic and radiometric data
are historical regional data, predating the
Fugro surveys of the 2000s. We lack metadata.
These data were probably collected on a
1,000m line interval. Gamma-ray spectrometer
data are recorded in counts per second (cps).
Anomalies within an area of interest (AOI) are
defined by the relative proportions of cps
values in that AOI; statistically determined
from the raster histogram of the selected
radioelement channel. To assist with target
generation the data was re-imaged; on the REE
target Th: the distribution is log normal; mean
value 376 cps and the 90th percentile 600 cps.
Data are rendered above the latter threshold.
MRG Metals Limited ABN: 83 148 938 532 / ASX Code: MRQ
Phone: +61 3 5330 5800 / Fax: +61 3 53330 5890
12 Anderson Street West, Ballarat VIC 3350 / PO Box 237 Ballarat VIC 3353
www.mrgmetals.com.au / info@mrgmetals.com.au
Criteria
Explanation
Further work
The nature and scale of
planned further work (eg
tests for lateral extensions
or depth extensions or
large-scale step-out
drilling).
Comment
•
Drainage networks were derived from the
Shuttle Radar Mission (SRTM) 1 arc-second
digital elevation model (i.e. approximately 30
m pixel resolution). The network of flow paths
was extracted using the algorithms of TNTMips
GIS.
Diagrams clearly
highlighting the areas of
possible extensions,
including the main
geological interpretations
and future drilling areas,
provided this information is
not commercially sensitive.
•
•
•
•
Environmental licence to be done for Fotinho
11000.
Drainage pattern interpretation to be used to
plan a stream sedimentary sampling program
covering the entire licence.
Geological confirmatory mapping (confirming
the existing 1987 regional geological map, will
take place.
Positive stream sedimentary results resulting in
the generation of targets will result in closer
spaced stream sedimentary sampling, soil
sampling, outcrop sampling, all with the aim of
generating trenching and drilling targets.
MRG Metals Limited ABN: 83 148 938 532 / ASX Code: MRQ
Phone: +61 3 5330 5800 / Fax: +61 3 53330 5890
12 Anderson Street West, Ballarat VIC 3350 / PO Box 237 Ballarat VIC 3353
www.mrgmetals.com.au / info@mrgmetals.com.au
Share your feedback
Discover